Tuesday, January 6, 2015

Samsung GT S7580 Mic Problem Microphone Ways



Samsung jiti S7580 Mic problem
Due to a broken lines, broken resistor or microphone to do some damage as Samsung Galaxy Trend Plus S7580 damage the microphone problem. This opportunity with us on the Samsung S7580 microphone to repair the damage and is willing to share tips and tricks. Look at the picture below to improve.

Mike damage, Mic Line Samsung S7580, a resistor and a capacitor is included and how to connect with Mic China Nokia Mic how to replace the loss pathways, resistor damage, capacitor damage, trick Jumper Mic line, support for picture with capacitor cardiac Samsung extra capacitors.



Mic problem on your phone
Your phone gets wet, do not realize that, while the phones common reasons:
Exposure to water - very often scalded, will be damaged if a Mic. Mike is the result of a short circuit of water damage and Mic.

Disconnecting Mic Line - Mic Line Disconnect usually some resistors and capacitors have been damaged.

Now I jiti Samsung S7580 Mic China will explain how to install

Remember the picture above to install: Android DOWNLOAD
Add voltage capacitor on track me, I can only record voice Mike, Chinese Mika me because it is too small for the size of the power IC capacitor has been added, the same line Mic (green wire) and me, includes a capacitor 4.7k. The results were pretty good record. I try apakha Mike via cell phone to call someone, but when working or not. Apparently my phone to my voice, the people can be heard. The resulting sound is very bad or worse hearing.
Line Mike Giant and I also balanced Mic Line has added a second resistor. NOTE: If you install Nokia phone Mic China, but also a capacitor and resistor phone Mic sound you heard was not good, do not include. Your line in Mike a capacitor and resistor must include. How successful mobile phone to install the Mic China.

Samsung S7580 Mic, microphone Jumper, Mic Working problem, Samsung jiti S7580 Mic Mic Jumper problem repair solution.
Read More..

Thursday, December 11, 2014

All China Mobiles MTK PA Jumper Repair Solutions

All China Mobiles MTK PA Jumper Repair Solutions
All China Mobiles MTK PA Jumper Repair Solutions
Read More..

Sunday, December 7, 2014

iPhone 5 Full Detailed Schematic Diagram

iPhone 5 Full Detailed Schematic Diagram 

This Diagram Show The Lightning Connectors .
Read More..

Monday, November 24, 2014

Upgrade Nokia Mobile Phones Firmware Via USB

This session will discuss how to update Nokia phone firmware without using the box. The trick is to use the data through the USB cable. Before you start, make sure you have met these requirements :
To install and run Nokia Software Updater application :


  • PC with 1 Ghz or higher pentium-compatible processor
  • At least 256 MB of RAM (memory)
  • Windows 2000 (SP4 or later) or Windows XP (SP1 or SP2)
  • Administrations rights on the PC while installing
  • Internet connection
To connect your phone to a PC :
  • Fully charged, compatible Nokia phone
  • Compatible Nokia USB connection cable
  • Compatible USB port on your PC
Next step is back up data, personal data such as contacts, photos and messages stored in phone memory will be deleted during phone software update. It is strongly recommended that you back up this data to your memory card before updating your phone software.
To back up data to your memory card, follow this steps :
  • Select Tools - memory (from the main menu)
  • Select Options - Back up phone memory
To restore info to phone memory :
  • Select Tools - memory (from the main menu)
  • Select Options - Restore from card
Read More..

iphone 3g sim solution


iphone 3g sim solution

Read More..

Thursday, November 20, 2014

How to calibrate a G Sensor by HTC

On a HTC smartphone, the G-Sensor allows applications to take advantage of the phones physical location in the real world from your hand. However, the G-Sensor will occasionally have to be adjusted to make sure it works properly. To calibrate the HTC G-Sensor, just adjust the appropriate settings on your phone.How to calibrate a G-Sensor by HTC
  1. Press the Menu button on your phone and click on "Settings".
  2. Click "Display" and select "G-Sensor Calibration".
  3. Place the phone on a flat surface and press the "Calibrate" button.
  4. Expected to complete the calibration process. Once the "Ok" button appears at the bottom of the Lcd, click on it to end the calibration process.
Read More..

motorola Moto G hard reset code


d
 How to reset my phone to factory settingsの?
Factory Data Reset is a tool used to remove evЖerything that was imported, added or installed on the mobile.
WARNING: When using this feature; everything is deleted.
Nothing stored on the Micro SD Card will be affected.
To Perform a Reset

    のOpen the Applications Tray. (Menu)
    のTouch Settings
    のTouch Privacy
    のTouch Factory data reset
    のTouch Reset Phone
    のTouch ЖErase Everything
     phone must be restart

To hard reset Reset
If there are significant problems with your mobile or you are not able to follow the steps above please use the following の process to manually reset the mobile:

    のTurn off mobile
    のPress Power switch + Camera Key to power on the phone and bring up theのrecovery screenの
    のPress Vol. Up + Camera Key to show the recovery menu.
    のSelect Wipe data/factory resetの
    のSelect restart Phone
Read More..