Monday, November 24, 2014

Upgrade Nokia Mobile Phones Firmware Via USB

This session will discuss how to update Nokia phone firmware without using the box. The trick is to use the data through the USB cable. Before you start, make sure you have met these requirements :
To install and run Nokia Software Updater application :


  • PC with 1 Ghz or higher pentium-compatible processor
  • At least 256 MB of RAM (memory)
  • Windows 2000 (SP4 or later) or Windows XP (SP1 or SP2)
  • Administrations rights on the PC while installing
  • Internet connection
To connect your phone to a PC :
  • Fully charged, compatible Nokia phone
  • Compatible Nokia USB connection cable
  • Compatible USB port on your PC
Next step is back up data, personal data such as contacts, photos and messages stored in phone memory will be deleted during phone software update. It is strongly recommended that you back up this data to your memory card before updating your phone software.
To back up data to your memory card, follow this steps :
  • Select Tools - memory (from the main menu)
  • Select Options - Back up phone memory
To restore info to phone memory :
  • Select Tools - memory (from the main menu)
  • Select Options - Restore from card
Read More..

iphone 3g sim solution


iphone 3g sim solution

Read More..

Thursday, November 20, 2014

How to calibrate a G Sensor by HTC

On a HTC smartphone, the G-Sensor allows applications to take advantage of the phones physical location in the real world from your hand. However, the G-Sensor will occasionally have to be adjusted to make sure it works properly. To calibrate the HTC G-Sensor, just adjust the appropriate settings on your phone.How to calibrate a G-Sensor by HTC
  1. Press the Menu button on your phone and click on "Settings".
  2. Click "Display" and select "G-Sensor Calibration".
  3. Place the phone on a flat surface and press the "Calibrate" button.
  4. Expected to complete the calibration process. Once the "Ok" button appears at the bottom of the Lcd, click on it to end the calibration process.
Read More..

motorola Moto G hard reset code


d
 How to reset my phone to factory settingsの?
Factory Data Reset is a tool used to remove evЖerything that was imported, added or installed on the mobile.
WARNING: When using this feature; everything is deleted.
Nothing stored on the Micro SD Card will be affected.
To Perform a Reset

    のOpen the Applications Tray. (Menu)
    のTouch Settings
    のTouch Privacy
    のTouch Factory data reset
    のTouch Reset Phone
    のTouch ЖErase Everything
     phone must be restart

To hard reset Reset
If there are significant problems with your mobile or you are not able to follow the steps above please use the following の process to manually reset the mobile:

    のTurn off mobile
    のPress Power switch + Camera Key to power on the phone and bring up theのrecovery screenの
    のPress Vol. Up + Camera Key to show the recovery menu.
    のSelect Wipe data/factory resetの
    のSelect restart Phone
Read More..

Nokia 1661 lcd ways


Nokia 1661 lcd ways
Read More..

Wednesday, November 19, 2014

Nokia E71 Charging Final Solution

Read More..

Nokia N91 Ringer Buzzer Ways Solution for ringer problem



Nokia N91 Ringer Buzzer Ways Solution for ringer problem

Read More..

Nokia 5300 mic solution


Nokia 5300 mic solution
Read More..

Tuesday, November 18, 2014

gfive u800 handsfree mode solution jumper


gfive u800 handsfree mode solution jumper

Read More..

Nokia 2630 ON OFF power button switch jumper ways

Heres the jumper ways solution for nokia 2630 ON and OFF switch if the handset device showed charging indication when the battery charger is plug-in but unable to power up when the power button is being pressed.

If the keypad flex is working okay and already tried a new replacement but still it wont power up when the power key is pressed.
The solution below showed the alternative spot where to apply a jumper wire when the power key line paths is cut .
Nokia 2630 power ON OFF jumper ways tracks

iPhone 2G Touch Screen Problem Repair Solution

iPhone 2G Touch Screen Problem Repair Solution
iPhone 2G Touch Screen Not Working Problem

Read More..

Monday, November 17, 2014

nokia 6233 side key jumper


nokia 6233 side key jumper
Read More..

Blackberry 9700 camera flash light


Blackberry 9700 camera flash light

Read More..

Sunday, November 16, 2014

iPhone 4 Light LCD Solution


iPhone 4 Light LCD Solution

Read More..

LG KU380 Sim Card Solution By Making Jumpers

LG KU380 Sim Card Hardware Repairing Solution By Making Jumpers
Read More..

Nokia 1110 1110i 1112 1600 LCD LED Light Solution

 
Nokia 1110 1110i 1112 1600 LCD/LED Light Solution
 
Nokia 1110 1110i 1112 1600 LCD/LED Light Solution
 
Nokia 1110,1110i, 1112 1600 6030 LCD/LED Light Solution
Nokia 1110,1110i, 1112 1600 6030 Display Lights Problem
Nokia 1110,1110i, 1112 1600 6030 Display/LCD Lights  Ways
Nokia 1110,1110i, 1112 1600 6030 LCD/LED/Display Lights Jumpers
Read More..

Saturday, November 15, 2014

LG GM200 Mic Solution Jumper Ways

LG GM200 Mic Solution Jumper Ways
LG GM200 Mic Solution By Jumper
LG GM200 Mic Solution 
LG GM200 Mic Not Working

Read More..

Nokia 5130 Dark Screen display No LCD Backlight Solution

This solution may possibly help fix nokia 5130 that has No LCD Display backlight LED and results to a dark Lcd displays.
If ever encountered this problem and then tried installing a new LCD Lcd module but still a dark Lcd display occurred and the backlight LED doesnt light up; This solution below shows the circuit components that holds the Nokia 5130 backlight LED.

Solution for Nokia 5130 LCD Display Backlight LED that Does Not Working
Nokia

You may check those corresponding components highlighted on the solution above.
Trace each particular line paths and check the supply voltage.
The LED driver chip when damaged will shutdown and all backlight LEDs unable to light up including the keypad backlight LEDs.So if both keypad and display backlight failed you may then suspect that the problem lies on the LED driver IC. But first, check the supply voltage and filter coils before attempting to replace it.
Read More..

Nokia 7230 Charger Not Supported problem solution

Heres the solution that may possibly help fix and repair nokia 7230 charging problem that shows charger not supported on the LCD Lcd when the battery charger is being plug-in.

The charger not  supported problem is cause by a faulty battery temperature indicator resistor. This solution below shows the location of that certain resistor on Nokia 7230 PCB board layout.

Nokia 7230 Not Charging Problem - Charger Not Supported Solution
nokia
By replacing the BTEMP 47K Resistor might possibly fix and repair Nokia 7230 charger not supported problem.
Read More..

Thursday, November 13, 2014

Nokia Asha 200 Insert Sim Problem Solution Jumpers Ways

Nokia Asha 200 have two stand by sims in it.if you are facing insert sim problem in Asha 200 for both sims or a single sim is not working here is the diagram that will help you to solve this problem in Asha 200.

In diagram you can see there are multiple lines with different colors that are indicating different sim points and there path to different parts you can check these path and if any of them is broken then you can make jumpers to them. if any part is not at the same place and have broken due to water damage or something else then you can see some points can also be scratched. So scratch them slightly and make jumper at that point.
Big round points on lines shows that you can make jumper on that point.
a big thanks to Mr Tuseef Ahmed for sending this diagram to us.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..

Nokia 2730 Ringer Buzzer Ways Problem


2730 Ringer Problem 2730 Buzzer Problem 2730 Ringer Ways 2730 Buzzer Way 2730 Ringer Jumpers 2730 Buzzer Jumpers
Read More..

How To Update Samsung Galaxy Note 3 Neo SM N750 and SM N7505 Firmware Version

This Tutorial will show you the right steps to update the software of your Samsung Galaxy Note 3 Neo, We will explain here the needed steps one by one in a clear and easy way, You can use this Guide to update the both models, SM-N750 and SM-N7505 LTE model, All you should take care of is selecting the right firmware package for each model, Never try to flash the SM-N750 model with SM-N7505 firmware files, And vice versa.

The Galaxy Note 3 Neo is powered by Exynos 5260 Chipset, Quad-core 1.3 GHz CPU, It has Mali-T624 GPU, You can enjoy the 2GB of RAM memory which gives you a good space to run your application smoothly, The Li-Ion 3100 mAh Battery offers up to 18 hours of talk time. Like many other Samsung new models the Galaxy Note 3 Neo has some basic specs like Bluetooth, WiFi, NFC, GPS, And much more. The Android OS v4.3 Jelly Bean is pre-installed too.
Preparation Steps:
1- Check the current firmware of your mobile, You can check it from Setting > About Phone, Or you can use this easy code *#1234#
2- It is a good idea to write down your device current firmware version, It will be useful later, In case something goes wrong.
3- Charge your mobiles battery to be at least at 90% of charging level.
4- Updating your mobiles firmware will delete everything from your device internal memory, So read this Guide to learn how you can make a backup of your important data (SMS, Contacts, Notes...etc).
5- In case you have an external memory card inserted into your mobile, Then remove it.
6- Download the Samsung USB Driver, And install it, Then restart your computer.
7- Download Odin3 program (Original Android Flasher), Extract to your computers desktop.
8- Download The Firmware package (N750 | N7505), Select the version you want to install it into your mobile.
9- Extract the firmware package to a known location on your computer.

Odin3 Settings:
1- Double click on Odin3.exe to run it.
2- These settings must be checked: Auto Reboot, F.Reset Time.
3- If you have the PIT file of your Samsung model, Then check: Re-Partition
Firmware Files Selection: Here we used N7505 firmware files as example
- Click on PIT button and select: HL3G_EUR_OPEN_4G.pit (N750), HLLTE_EUR_OPEN_4G.pit (N7505)
- Click on BL button and select: BL_N7505xxxxxxx_2477720_REV00_user_low_ship.tar
- Click on AP button and select: AP_N7505xxxxxxx_2477720_REV00_user_low_ship.tar
- Click on CP button and select: MODEM_N7505xxxxxxx_REV00_CL1490690_SIGNED
- Click on CSC button and select: CSC_xxx_N7505xxxxxxx_2477720_REV00_user_low_ship.tar
Putting your Galaxy Note 3 Neo into Download Mode:
At this step you have to turn off your Samsung cell phone, Take out its battery and SIM card, Then read this Guide to put it in Download Mode, To be able to install the new firmware into you device your should put it into this mode.

Installing the new Firmware into your Samsung Galaxy Note 3 Neo device:
1- After you put your mobile into Download Mode, Use the USB cable to connect it to your computer.
2- You have to wait until Windows detects the device and installs any needed drivers.
3- Look at Odin3 programs window, If the program detects your connected device correctly, You should see its COM Port number (0:[COMxx]).
4- You are ready to install the new firmware files into your Samsung Galaxy Note 3 Neo, Click Start button to begin.
5- After you click the Start button, Odin3 program will start to install the selected firmware files into the connected device.
6- Odin3 program will restart your Samsung mobile automatically after installing the firmware.
7- Wait until your mobile is restarted.
8- Look again at Odin3 programs window, If you see PASS! Word in green, Then the update was done successfully.
9- Disconnect your mobile.
10- When the mobile is fully on, Check the new installed firmware version.
11- Now you are ready to use the device, So reinsert the SIM and Memory cards, Restore your backup, And customize it.
Read More..

Wednesday, November 12, 2014

Nokia X6 Earpiece Speaker No Audio Sound Solution

if having tried to fix Nokia X6 Earpiece Speaker Problem that No Audio sound output can be heard and you already check  speaker is okay and also already  tried replacing the Flex cable wire but he problem unsolved. This solution might possibly help to solved the problem.

Nokia X6 Earpiece Speaker problem solution
nokia
If the earpiece speaker and flex cable wire is working okay, those particular components highlighted on the solution might causes the problem if the device is severely damaged by any means of liquid or water damaged. Start to check on the flex pin connector and way down toall corresponding components composed of filter coil and bypass ESD resistor, replace at once if found open or shorted. If the filter coils were okay you may need to rework the power and audio IC (AVILMAS) trace the line paths first while the IC is being removed, then reball the IC, clean the solder balls surface and inplaced it back again.
Read More..

Nokia 5800 volume up down not working solution

nokia 5800 volume up down not working then it’s solution can be as given in bellow diagram.volume keys are used to make it up and down speaker voice during call or during music and video playbacks.to solve key volume problems you can check a few parts and tracks.


as in above diagram buttons location can be found check these two voluem buttons and if any of them is not working or damage then replace it.if buttons are ok then black lines are defining ground prints that are -v and red color line shows +v track so check these path and if missing apply jumpers as you can see in diagram above.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..

Nokia 6210n Mic Ways


Nokia 6210n Mic Ways
Read More..

Sunday, November 9, 2014

Nokia C1 not charging solution

Nokia C1 not charging solution
Read More..

NOKIA C1 00 HANDSFREE SOLUTION

NOKIA C1-00 HANDS FREE SOLUTION: HERE IS SOLUTION IMAGE FOR NOKIA C1-00 HANDSFREE PROBLEM. TO SOLVE NOKIA C1-00 HANDSFREE FOLLOW THE IMAGE.
Read More..

NOKIA 1110 LOCAL MODE REPAIR

NOKIA 1110 LOCAL MODE REPAIR: THE IMAGE SHOWS YOU HOW TO SOLVE NOKIA 1110 LOCAL MODE PROBLEM.
Read More..

Saturday, November 8, 2014

Android Mobile Secret Codes

The short-cuts or codes of Android am telling you are used in all versions included the latest one of Android devices or phones.


Secret Codes                    Functions/Description

    *#06#                             To check IMEI of your device, enter this code.
    *#0*#                             To enter service menu on the very new Android phones.
    *#0228#                                   To check battery status.
    *#9090# / *#1111#                  To make device in Service mode.
    *#*#4636#*#*                To get information about battery, usage statistics and device.
    *#*#34971539#*#*                 To get all information about camera.
    *#12580*369#                       To get software and hardware info.
    *#228#                                 For ADC Reading.
    #7353#                                     To hide test menu 2/Self Test Mode.
    ##7764726                               To hide service menu for Motorola Droid.
    *#*#273283*255*663282*#*#*   For backup of our all media files.
    *#*#232338#*#*                       It display the Wi-Fi mac address.
    *#7465625#                               To view status of lock-phone.
    *#*#3264#*#*                           To show RAM version.
    *#*#44336#*#*                         To display build time and change list number.
    *#*#232337#*#                         To see or display device’s Bluetooth address.
    *#*#197328640#*#*                 It enables test mode for service.
    *#*#8351#*#*                           To enable voice dial mode.
    *#*#8350#*#*                           To disable the voice dial mode.
    *#*#0842#*#*                           To test Back-light/vibration.
    *#*#2664#*#*                           To test the touch-screen.
    *#*#0289#*#*                           For Audio test.
    *#*#0*#*#*                               For LCD display test.
    *#*#232331#*#*                       To test Bluetooth of any Android device.
    *#*#0283#*#*                           To perform a packet loop-back test.
    *#*#1575#*#*                           For advanced GPS test.
    *#*#1472365#*#*                     To Perform a quick GPS test.
    *#*#0588#*#*                           To perform a proximity sensor test.
    *#*#7262626#*#*                     To perform field test.
    *#*#232339#*#*                       Testing Wireless LAN.
    *#9090#                                     To Diagnose configuration of device.
    *#872564#                                 To control U-S-B logging.
    *#9900#                                     System dump mode.
    *#*#7780#*#*                           Reset  to factory state.
    *2767*3855#                             To format Android device.
    *#*#4986*2650468#*#*          To get pda, phone, H/W and RF Call Date.  
    *#*#1234#*#*                      To know about pda and firmware version.                 
    *#*#1111#*#*                           For FTA Software version.
    *#*#2222#*#*                           For FTA Hardware version.
    *#*#7594#*#*                  To change power button behaviour once code enabled.      
    *#*#8255#*#*                           To launch Google Talk service monitor.

Read More..

Nokia X6 No Network Signal Reception problem solution hardware repair solution

Heres the solution that may help and guide to repair Nokia X6 having a No Network Signal reception. If ever tried to  restore and update the device firmware but nothing happens, this solution shows the corresponding  RF circuit of Nokia X6 PCB board that might something wrong, faulty or being damaged.
Nokia X6 No Network Signal problem solution
nokia
Repair Tips:
1. Apply and supply voltage to the PCB board using desired DC regulated power supply voltage of 3.7 volts. Check the supply voltage from the cellphones battery through to the corresponding components highlighted in red color, these are battery supply voltage filter coils that being feeds to RF circuit components. IF there are no voltage readings on that areas, check the continuity of the battery positive terminal on that certain parts. Apply jumper if the line is cut or open. check also the filter coils and replace if found damaged.
2. Check and measure the secondary voltage output from the RF DC to DC converter chip highlighted in orange color. If there is no voltage readings on that spots, rework or replace the DC to DC converter IC.
3. Check or replace the Clock crystal oscillator. (VCTXO)
4. Rework or replace RF Power Ampilifier IC (PA)
5. Rework or replace Front End Module IC (FEM)
6. Rework or  replace Radio Frequency IC (RF IC)
Read More..

Friday, November 7, 2014

Nokia Asha 200 Power Button On Off Switch Not Working Problem

if you have a Nokia Asha 200 dead they may can have a power switch on off problem so please in first step plug in a charger and if Nokia Asha 200 is charging proper and well but not getting on it means the main problem can be power switch on off fault.

so for this you have to change power switch button on off button in Nokia Asha 200 if prints are also damge in Nokia Asha 200 for on off button then here is a full path and track for power switch button in diagram that is attached with this post so check all this path and track for power switch on off button in Nokia Asha 200 and if any of these links broken than make these jumpers as shown in diagram with red line while blue color is indicated for ground print. 
Read More..

Hard Reset LG Optimus L7 II Dual P715

How to Hard Reset Your LG Optimus L7 II Dual

When You Have To Hard Reset Your Device ?

You Can Apply Hard Reset In Many Cases We Will Tell You Some Example

* Forgotten Pattern Lock

* Forgotten Phone Lock

* Forgotten User Code

* If Your Phone Seems Frozen Due To Any Cases.

Take Care oi These Factors Before You Reset Your Phone

* Please Backup Your Data Using any Backup Software

* Please Maintain 50% Battery Charge 

How To Hard Reset Your LG Optimus L7 II Dual

 

* Switch Off Your  LG Optimus L7 II Dual P715
* Take Out Your Sim And Memmory Card
* Press And Hold  Volume Down Key  +  Hot Key    +  Then Power On Your Phone
* Hold Pressing Keys Untill The Lg Logo Appears
* When Lg Logo . Release Power Key
* Then Release Hot Key + Volume Down Key When The Lg Logo Disappears 
*  After 1 minute Your Phone Will Restarted. After Completing Hard Reset Process
*  Done ! Enjoy
Read More..

Thursday, November 6, 2014

Nokia C2 01 ringer problem solution jumper ways

NokiaNokia C2-01 we cannot hear voice of music and videos in the mobile phone. We cannot make a loud speaker call and it will not play ringtones. In some cases ringer is ringing but with a noise or a low voice quality Nokia 2330 Classic Ringer Problem Jumper Ways Solution  see all cellular mobile repairing solution.
In all these cases this post will help you to solve ringer problem in Nokia C2-01. After dis assembly of Nokia C2-01 change ringer and check it if problem cannot be solve with replacement of ringer you can see all these tracks that are given in above diagram to solve ringer problem in Nokia C2-01
This solution of ringer problem in Nokia C2-01 is possible with these tips and tricks. Check all these tracks with meter and if any of them is missing then you can apply jumpers as given in above diagram to repair the ringer.
Read More..

35 brilliant iOS 7 tips and tricks

The jury may still be out on iOS 7s radical redesign - for what its worth we love it, with a few reservations - theres no denying that its the friendliest and most powerful version of iOS yet.


But theres more to iOS 7 than headline features such as Control Centre and iTunes Radio: some of the best improvements are small things that make our everyday lives that little bit more pleasant.

These are our favourites:

1. Camera: shoot in burst mode


The redesigned Camera app has a nifty trick up its sleeve: if you want to shoot in burst mode, taking multiple shots in quick succession, just click and hold the volume-up button.

2. Multitasking: quit multiple apps


You probably know that you can quit running apps by double-tapping the Home button and flicking the offending app upwards, but you might not have tried it with multiple fingers to force-quit more than one app at a time. Weve made it work with three apps on our iPhone, although doing the same on an iPad means getting your nose involved too.

3. Notifications: begone!


When you receive a new notification, you can still swipe right to open the appropriate app - but if you just want rid of it you can now swipe up to hide it.

4. All new balancing act


iOS 7 is bad news for novelty app developers: not only has the Control Centre killed the market for flashlight apps, but Compass has done the same for spirit level apps too.

If you launch the app youll see the familiar dots at the bottom of the screen that indicate theres a second screen: swipe it and youll see a spirit level for all your checking-things-are-flat needs.

5. Phone, FaceTime and Messages: block contacts


Does someone have your number and you wish they didnt? Successfully avoid exes, creditors and the angry husbands and wives of your lovers with iOS 7s excellent blocking features. Add the number to your Contacts, scroll down to the bottom of the screen and tap Block This Caller to refuse incoming calls, messages (including SMS and MMS) and FaceTime calls.

6. Messages: see the timestamps


iOS 7 likes to keep things nice and minimalist, but if key information isnt visible theres a good chance its just a swipe away - so for example in Messages, you wont see timestamps against each SMS, MMS or iMessage. Want to know when they were sent? Swipe left.

7. Apps: swipe backwards


This little tip is a handy time-saver: when youre finished reading an email or message, or fiddling with Settings, or exploring a Music playlist, swipe backwards to return to the previous page. If youre at the first level (such as your list of mailboxes in Mail, or the first Settings screen) nothing will happen.

8. Location Services: see where youve been


iOS 7 keeps an eye on where you go to help it personalise features such as the Notification Centre, and to help improve the accuracy of Maps. If you fancy a look youll find it in Settings > Privacy > Location Services > System Services > Frequent Locations. Youll see a list and a map, with blue circles showing where youve been and when. You can clear the history from this page, and if you think its a little creepy you can turn it off from the System Services page.

9. Newsstand: put it away!


We like Newsstand, but we dont like the way it cant be stuck in a folder like Apples other stock apps. Hallelujah for iOS 7, then, because at last that absurd restriction has been removed.

10. Settings: make iOS 7 easier on the eye


We like the new interface, but it isnt for everyone. If you have problems with your sight or just want to make iOS more legible, youll find some useful settings in Settings > General > Accessibility. You can make all system text bold, increase the size of text in apps that support Apples Dynamic Type, scale down motion effects such as the parallax effect or invert the colours to make iOS 7 look like a 1980s electro-pop album cover.

11. Sounds: get some new tones


iOS 7s library of sounds (Settings > Sounds > Sounds and vibration patterns) has been given a regular update, and Apple says theyre so good you might miss calls because youre dancing. That, frankly, isnt very likely.

12. AutoFill: let Safari input your details


Feeling trustworthy? Safari can automatically fill out web forms using your Contact info, previous names and passwords, and credit card details, should you so wish. You can toggle these AutoFill options individually from Settings > Safari > Passwords > AutoFill.

13. Siri: now reads your emails


Siri makes light work of not only listing emails in your inbox, but also reading them out to you. Hold down the Home button and say, "Read my emails" and Siri will give you sender, time and date sent, and the subject of each in turn. When asked if you want it to read out your mail, just say "Yes".

14. Apps: one folder to rule them all


Unlike previous versions of iOS, theres no limit to the number of apps you can file away in a single folder. Now you can simply pile icons onto each other to your hearts content. Finally, an end to the Games 1, Games 2, Games 3 (ad nauseum) home screen debacle.

15. Motion: reducing sickness


iOS 7 likes to advertise its existence to you with all manner of motions, animations and alerts. If all the hullabaloo is leaving you slightly queasy, put a dampener on things by selecting Settings > General > Accessibility > Reduce Motion > Off.

16. Notification Centre: not on my lock screen


Notification Centre got a visual overhaul in the latest version of iOS, offering a neat snapshot of your appointments and message snippets accessible from the lock screen. But not everyone wants their itinerary on show to all and sundry. Happily you can turn off this overview from Settings > Notification Centre, using the sliders listed under - you guessed it - Access on Lock Screen.

17. FaceTime: data and duration


You can check out your complete list of FaceTime calls via the Recents option at the bottom of the screen in the FaceTime app. If you tap the "i" next to each call you can see a breakdown of how long the call lasted and find out how much data it used.

18. Maps: walk or drive everywhere


Maps still has its downsides, but its useful for the most part - more so now that you can choose a default mode of travel. If youre more rambler than driver and want to avoid having to define your directions as such, simply tap to Settings > Maps and select Walking under Preferred Directions.

19. App Store: Near Me


A new tab in the App Store app called Near Me automatically lists the most popular apps in your general location. That might sound a bit gimmicky, but we found it useful when visiting towns and cities for the first time, when it turned up local transport and tourist information apps.

20. Apps: Background App Refresh


iOS 7 introduces the ability to selectively control which apps are allowed to refresh their content while youre getting on with other business. When battery life is at a premium, turn off any offenders by going to Settings > General > Background App Refresh.

21. Apps: Automatic Updates


iOS can now update your apps automatically. Thats great as long as a) you have an unlimited data plan, and b) your favourite apps functionality doesnt get mangled with some poorly advised revisions. Control this function either way by going to Settings > iTunes and App Store and sliding the Updates option under Automatic Downloads.

22. Siri: can handle calls


You probably know that you can ask Siri to place calls for you, but did you know that you can ask her/him/it to play your voicemail or return your last missed call? Simply say "Return missed call" or "Do I have new voicemail?" and Siri will snap to it. You can also tell Siri "Check my call history" and get a list of your recent calls.

23. AirDrop: share everything with ease


Want to quickly share a photo, a web page, a location, or a contact with someone? Thats what AirDrop is for. If you have Bluetooth and Wi-Fi turned on, then you can select AirDrop in the Control Centre and then tap the share icon on whatever you want to share and choose the person you want to share it with.

24. Data: stay within your allowance


Most contracts have a monthly allowance for data and youre going to get stung if you exceed it. Head into Settings > Cellular and scroll down to see which apps might be eating your data. If theres anything unnecessary listed just toggle it off. If you reset the Cellular Data Usage each month you can also use it to keep an eye on where you are.

25. iMessages: delete or forward


Sadly theres no way to delete the embarrassing text you drunkenly sent the object of your affection last night from their phone, but you can delete it from yours.

The method is slightly different in iOS 7, hold down your finger on the message and tap More… and you can tick individual messages and delete them by tapping the trashcan at the bottom of the screen. If you want to send the same message on to someone else then tap the arrow at the bottom right instead.

26. FaceTime: dont look at me!


Whether youre ill, hung over or just feeling ugly, youll be glad to know that you can now make a FaceTime call without video. To make an audio only call using FaceTime select the contact you want and then just tap the telephone icon to the right of the FaceTime option.

27. Notification Centre: alerts and badges


If you hate the sound that plays to notify you of an incoming message, or you cant stand the red badges on your app icons, then do something about it. Go into Settings > Notification Centre and you can select individual apps and choose whether the Badge App Icon should appear, what sound should play as an alert, and where alerts will show up.

28. Siri and Safari: search Google


You cant change your default search engine in Siri from Microsofts Bing, but you can say "Search Google for Tech Radar" and get the results you want. In Safari you can switch it. Go to Settings > Safari > Search Engine and pick your favourite.

29. Weather: its probably still raining


When you fire up the weather app you can see basic info for your chosen cities. Tap the city and youll get the current temperature and an extended 7-day forecast.

Tap on that big temperature number and you will reveal a breakdown showing humidity, chance of rain, wind speed, and what temperature it will actually feel like when you head out.

30. Keyboard: speed typing


Its easy to miss little shortcuts that can speed up your typing - you might already know these from previous versions of iOS, but if not, theyre massive time-savers.

Double tap the spacebar and youll end a sentence with a full stop and automatically bump on a space ready for the next one. You can also double tap the shift key to keep caps lock on, and hold down the "123" key to pick a single character without leaving the standard keyboard layout.

31. Brightness: Reduce the glare


You know that feeling when your iPhone or iPad screen flicks to life in a darkened room and instantly melts your eyeballs?

Apples love of a clean white aesthetic can be painful at times, but with iOS 7.1 you can do something about it. Go to Settings > General > Accessibility > Increase Contrast and toggle Reduce White Point to On.

Youll find the glaring white has been dialled down a notch. Wizard.

32. Button shapes: press here


Not everyone is a fan of iOS 7s minimalist look and the lack of outlines on buttons can make it harder to tap your target. Well, now you can bring them back.

Just go to Settings > General > Accessibility, scroll down to Button Shapes and toggle it on.

Youll get grey outlines on buttons in the menu bar and tappable text will be underlined - although it does make everything look a little less refined compared to the usual Apple fluidity.

33. Siri: stop listening


Theres a pause when youve finished speaking before Siri realises that youre done and it can be annoying having to wait.

Sometimes Siri decides youre done because you paused for a moment too long, but actually you arent. If you were done, you could always tap the screen to tell Siri to stop listening, but thats a bit convoluted.

With iOS 7.1 you can hold down the Home button while you speak and let go when you are finished so Siri knows exactly when youre done. This is especially handy if you only have one hand free.

34. Perspective Zoom: Kill the parallax


Whether it gives you motion sickness or you just dont like it, there is thankfully now a way to get rid of the parallax effect on your wallpaper without having to kill the zooming transition animations coming in and out of apps.

If you have Reduce Motion off in Settings > General > Accessibility, then you can go to Settings > Wallpapers & Brightness, choose your lock screen and home screen wallpapers and toggle Perspective Zoom to the Off position.

35. Contrast: Reduce transparency and darken colours


If you dont like the transparent menus with blurred backgrounds underneath then good news: you can tweak them. Head into Settings > General > Accessibility > Increase Contrast and turn on Reduce Transparency.
It will make the dock, keyboard, Notification Centre and everything else opaque. You may also want to toggle on Darken Colours to make everything a little easier to read.
Read More..

Wednesday, November 5, 2014

Nokia 6300 insert sim

Nokia 6300 insert sim 1st rehot ic ,remove sim ic and apply jumper
Read More..

Nokia Asha 200 Ringer Problem Solution Ways Jumpers

Nokia Asha 200 Have two ringer and both of these ringer are shown in diagram all track and paths for two ringers are defined with different colors so look at the diagram given bellow and make these jumpers as Nokia



shown in diagram they will help you to solve ringer not working low voice or ringer problems in Nokia Asha 200.some parts have single leg ground while other is used for ringer path so if any of them have ground we have to jumper on the other side of that resistance or capacitor.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Read More..

Tuesday, November 4, 2014

Nokia 5800 earpiece speaker problem solution tested

earpiece speaker in Nokia 5800 can be solve with a few steps that are given in this post bellow.in this problem we will not be able to hear incommingin voice from speaker.we can use loud speaker as temporary solution.to solve it permanantly use bellow diagram.Nokia 5250 Speaker Ere Peace Not Working Problem Solution Jumpers

as you can see in diagram above there are a few color lines that are defining tracks and parts that are used in speaker function in Nokia 5800.Change speaker and check speaker points on mother board if they have a good value.
if meter do not show any value then there can be broken path or parts so apply jumpers for path and replace components if any of them is missing or broken as shown in above diagram to solve Nokia 5800 earpiece speaker problem solution tested.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..

Monday, November 3, 2014

Troubleshooting SanDisk Sansa Clip Zip MP3 Player Problems

Common problems with the SanDisk Sansa Clip Zip MP3 player include the device not turning on or not being recognized by a computer, the selected song not playing, the device freezing up, podcasts not playing, and artist and album information not appearing for the selected song. Most problems with audio files can be resolved by ensuring that the file youre attempting to play is supported by the player and by entering the metadata for the audio file. System problems can often be resolved by putting the device mass storage class (MSC) mode, uninstalling and reinstalling the devices drivers, and forcing the device to shut down and then rebooting it; if youre experiencing system problems on a regular basis, ensure that the MP3 players firmware is updated.

The
The SanDisk Sansa Clip Zip MP3 player offers 4 GB of storage space and features a built-in FM radio receiver.
Source: SanDisk

Device Doesnt Turn On

If your SanDisk Sansa Clip Zip MP3 player battery became completely drained while the device was frozen or locked up, the device likely wont power on when you connect it to a computer and youll need to put the device in mass storage class (MSC) mode while connecting it to the computer for the computer to recognize it. The only difference between MSC mode and the standard mode your MP3 player operates in is that when you connect your computer when its in standard mode, it displays under Portable Devices in Windows Explorer; when you connect your device to your computer in MSC mode, its displayed under Devices with Removable Storage. Upon disconnecting your MP3 player from your computer its no longer in MSC mode. You can put your device in MSC mode while connecting it to the computer by doing the following:

  1. Hold the center button down on the SanDisk Sansa Clip Zip MP3 player.
  2. While holding the center button down, connect the device to your computer using the USB cable that came with the device. The device should turn on shortly after being connected to the computer.
  3. Leave the device connected to the computer to charge before disconnecting it again.

Computer Doesnt Recognize SanDisk Sansa Clip Zip MP3 Player

If youre device is working but your computer doesnt recognize it, first try putting the device in MSC mode as outlined in the Device Doesnt Turn On section. If that doesnt work, try checking the device drivers by doing the following:

  1. Reconnect the MP3 player to your computer using the USB cable that came with the device if its not already connected and then click he Windows Orb on the taskbar to open the Start menu.
  2. Right-click "Computer" on the right side of the Start menu to open a context menu.
  3. Click "Manage" to open the Computer Management window.
  4. Click the expansion box to the left of System Tools and then click "Device Manager." The Device Manager appears on the right half of the program window.
  5. Click the expansion boxes to the left of Portable Devices and USB Mass Storage; your device will be listed under one of these options. If there is a yellow exclamation point next to your MP3 players name, there is a problem with the devices driver. The driver needs to be uninstalled and then reinstalled in an effort to resolve your problem.
  6. Right-click the name of your MP3 player and then click "Uninstall." The devices driver is uninstalled.
  7. Click "Action" along the top of the program window after the driver is uninstalled and then click "Scan for hardware changes." The computer will detect your device and reinstall your drivers. If you experience this problem on a regular basis, try updating the MP3 players firmware as outlined in the Update SanDisk Clip Zip Firmware section.

Selected Song Doesnt Play

  • The SanDisk Sansa Zip Clip only supports audio files in the WMA, MP3, secure WMA, WAV and Audible formats. You may be able to load an audio file that isnt in a supported format to your MP3 player, but it wont play when you select it.
  • If your audio file type is supported by the player and it still wont play, you may not have permission to play the audio file on the device. For example, MP3 files purchased through iTunes are only capable of being played on five devices. As a result, if you purchased a file on iTunes, loaded it to five other devices and then tried to play that file on your SanDisk Sansa Clip Zip MP3 player, the file wouldnt play and it would automatically skip to the next track.

Device is Frozen or Locked Up

If your SanDisk Sansa Clip Zip MP3 player is frozen or locked up, perform a hard reset to unfreeze it. You can perform a hard reset by pushing the "Power" button up and holding it in place for at least 15 seconds. The Power button is located in the middle of the left edge of the MP3 player. Performing a hard reset forces any programs that were open to close and forces the entire device to shut down. Wait a few seconds and then reboot your device, which should operate without locking up, at least for a while.

Why Wont My SanDisk Sansa Clip Zip Play Podcasts?

The MP3 player does play podcasts, but the podcasts you load to the device have to be in one of the supported audio formats listed in the Selected Song Doesnt Play section. There are a variety of free audio converters available online that will convert most non-supported file types to a supported file type, such as Any Audio Converter.

Unknown Album and Artist is Listed Instead of Actual Album or Artist

This is a result of the metadata for that particular audio file not being filled in, which is common in songs acquired through peer-to-peer file sharing networks. Generally, if you purchase an MP3 online or if you rip one of your personal CDs, the metadata will be filled in for the file. You can input metadata on your own by doing the following:

  1. Right-click the audio file you want to enter metadata for to open a context menu.
  2. Click "Properties."
  3. Select the "Summary" tab.
  4. Click "Advanced" beneath the Comments box. Various metadata fields will be displayed, such as Artist, Album, Year and Genre. Click any of these files and input the data you want to be entered for that particular audio file.
  5. Click "Apply" and then "OK" after making your changes to save your file. Youll have to remove the existing audio file for that song from the SanDisk Sansa Clip Zip MP3 player and load the newly saved audio file to see the changes.

Update SanDisk Sansa Clip Zip Firmware

Most other problems with the SanDisk Sansa Clip Zip MP3 player can be resolved by updating the devices firmware. Updating the firmware adds functionality to your device and also addresses problems discovered with your device since the last firmware update was released. You can update your devices firmware by doing the following:

  1. Download and install the Sansa Firmware Updater program on your computer.
  2. Plug the larger end of the USB cable that came with the device into the computer and then connect the other end of the cable to the SanDisk Sansa Clip Zip.
  3. Click "All Programs," "SanDisk," "Sansa Updater" and then "Sansa Updater" again. The Sansa Firmware Updater program launches. If a firmware update is available, it will be listed beneath Downloads.
  4. Click to check the box to the left of Firmware and then click the "Download Now" button at the bottom-right corner of the program. A blue progress bar appears beneath Firmware, displaying the progress of the firmware download.
  5. Click the "Finish" button after a screen appears confirming that the firmware is finished downloading.
  6. Unplug the USB cable connecting your SanDisk Sansa Clip Zip MP3 player to the computer. A message appears on the screen saying that a firmware update is currently occurring. When the firmware update is finished installing itself, the device will shut itself down.
  7. Restart your SanDisk Sansa Clip Zip MP3 player and continue using the device as your normally would.

Read More..

Run Mobile Application On PC Jar and Jad

Run

Have you ever wondered of playing your favorite java mobile games on your pc, Yeah you can do it

Here you will find an intresting software to run your favourite mobile apps on computer.




Lets Start, Follow the below steps:
  1. First Download KEmulator Lite Click me to Download... (Select java emulator for windows)
  2. Exctract The Zip File and Open KEmulator.exe
  3. Click On Midlet
  4. Click Load Jar And Select Your Application.
  5. Now you can run your favorate mobile app on pc
  6. Thats It!
Read More..

Sunday, November 2, 2014

Nokia 5700 Xpressmusic Bluetooth Solution

Heres the solution  that covers for Nokia 5700 Bluetooh Problem that shows "unable to perform bluetooth operation" when switching on the bluetooth on the device.

If encountered this kind of problem you may try to restore the flash firmware first before doing any hardware troubleshooting attempt. 
The solution below show the spots where to start and do test and check up procedures in particular components that is connected to the bluetooth circuit on Nokia 5700 PCB board.

Nokia 5700 unable to perform bluetooth operation solution
nokia
The solution above shows the three supply voltage that being feeds to the Bluetooth IC module. You may first trace and check this supply voltages before attempting to replace the bluetooth chip.
Rework the bluetooth IC first and then inplace it back, if the problem still exists , you may necessarily need to replace the bluetooth module chip.
Read More..

iphone 3Gs correct green color solution


iphone 3Gs correct green color solution

Read More..

Saturday, November 1, 2014

Nokia 3710 fold keypad flex membrane line connection ways and tracks solution

Heres the Nokia 3710 fold keypad flex membrane line connection ways and tracks that can be used to trace a certain keypad keys that stop responding or not working when being pressed. This solution can be helpful to trace if there is one or more particulars keys that does not work before trying to figure out the main PCB board components that holds the keypad connection like the keypad filter IC.

The solution below shows the navigation  and  alphanumeric keys connection between each other including the volume control buttons like the volume up and the volume down.

Nokia 3710 fold keypad matrix line connection ways and tracks
nokia

Each keys have a designated color code for easy tracing procedure. The outer and inner core where both have different connection with each other. Just refer to the solution above for tracking particular keys that is not working or having a problem. For further troubleshooting nokia 3710 fold keypad problem or if this solution already used or already tried installing a new keypad flex matrix but the problem still exists see the Nokia keypad filter IC jumper ways tracks solution
Read More..